Add, Change or Remove a Source Device

getting started update your jubileetv console device configuration whenever you add, swap, or remove a source device you should modify your source devices when adding a device you have a new source device to connect to an available hdmi port replacing a device you are swapping an old source device for a new one removing a device you no longer use a source device and want to clear it from your console changing usage modes you have more than one source device configured and want to enable https //docs getjubileetv com/usage mode#xy7tc adding a source device the jubileetv console features 3 hdmi inputs the setup process depends on whether or not the hdmi input you want to use is already configured adding to an unconfigured input simply plug your new source device into an available hdmi port the new device detected message will automatically appear on your tv asking if you’d like to proceed with setup—follow the onscreen prompts to add your source device adding to a configured input if the new device detected message does not appear when you plug in your device, this means the hdmi port is already assigned to another device follow the instructions below for changing a source device changing a source device if you are replacing a device already configured to one of the console's hdmi ports (e g , swapping an old cable/satellite set top box with a new one), follow these steps set the active input make sure the device you are replacing is the one currently appearing on your tv to do this, your tv must be set to the jubileetv input , and the console must be switched to the specific device you want to remove swap the hardware unplug the old source device from the conosle's hdmi port and plug in your new source device initialize the new device the new device should now appear on your tv before configuring it to work with jubileetv, use the new device’s original remote to complete setup follow the manufacturer’s prompts to create or sign in to your account connect to wi fi ensure it is on the same network as your jubileetv console prepare apps if the new device is a media player, download and sign in to any streaming apps (netflix, prime video, etc ) you plan to use open settings on the jubileetv remote, press the guide button three times, then press the blue j button once you can also access console settings via telescope by typing "settings" into the command field navigate to devices select console settings , then select devices select the input locate the old device or the specific hdmi input you wish to update update configuration select the device and choose "change device " follow prompts complete the setup by following the onscreen prompts to identify and configure your new hardware removing a source device if you no longer need a device that is currently configured to an hdmi port, follow these steps to remove it from your system unplug the source device unplug the old device from the hdmi port on the jubileetv console if it is not already disconnected open settings on the jubileetv remote, press the guide button three times, then press the blue j button once you can also access console settings via telescope by typing "settings" into the command field navigate to devices select console settings , then select devices select the input find the old device (or the specific hdmi input) you want to remove and select it confirm removal select "remove device" to clear the configuration from your jubileetv settings