Hub Settings
Overview
The JubileeTV experience can be tailored to the specific needs of the TV End User by adjusting the Hub Settings for each Console.
Permissions
User Type | Permission |
|---|---|
Primary Admin | Yes |
Contact Admin | Yes |
Contact | No |
TV End User | No |
Accessing Hub Settings
To modify the configuration for a specific Console, follow these steps within the JubileeTV app:
- Select the Hub: On the app home screen, find the card for the room you wish to adjust. Tap the Gear Icon located to the right of the room name.
- Open Settings: Once the Hub menu opens, tap the "Settings" tab at the top of the screen.
- Adjust & Save: Browse the categories and make your desired changes.
- Confirm Changes: Scroll to the very bottom of the page and tap "Save Changes" to ensure your new settings are applied to the Console.
Hub Settings
Room Name
Select the name that best matches the location of the Console (e.g., Living Room, Bedroom).
TV Video Call & Telescope Mic
This setting allows you to choose the default microphone used for Video CallingVideo Calls, TelescopeTelescope Talk & Listen Mode, and Family Stories.You can always change this setting live during an active session.
- Remote Mic: Best for clear audio while sitting on a couch.
- Console Mic: Uses the microphones built into the Hub.
Important Note: If the Voice Biomarkers feature is enabled on the account, the system will automatically override this setting and use the Console Mic.
Video Call Camera Behavior
Determines if Video Calls and AutoConnect Video Calls start with the Console camera ON or OFF. This setting is ON by default.
Drop In Mic
This setting allows you to choose the default microphone used for Drop InDrop In.You can always change this setting live during an active session.
Drop In Starting Audio
Set whether you want Drop In session to begin with the audio ON or MUTED.
TV Live Captions
Enable or disable real-time text during video calls. If enabled, you can also select the text size (Small, Medium, or Large) to suit the TV End User’s needs. This setting is OFF by default.
Remote Backlight
The JubileeTV remote features a built-in motion sensor that detects when the remote is picked up or moved. You can configure when the buttons light up to balance visibility with battery life.
- Always On: The buttons will light up every time motion is detected, regardless of the time of day. (Note: This setting uses the most battery power).
- Always Off: The buttons will never light up, even when the remote is moved. This is the most battery-efficient setting.
- Off from 9:00 AM – 6:00 PM (Default): The backlight remains inactive during daylight hours to save battery. The buttons will only light up when motion is detected outside of this window (from 6:01 PM to 8:59 AM).
- Note: This schedule is based on the local timezone of the JubileeTV Console.
Automatically Turn TV Off
You can set a specific time of day for the TV to power down (e.g., 11:00 PM). This setting is OFF by default.
- Note: This schedule is based on the local timezone of the JubileeTV Console.
Power-On to Power-Off Timer
If the TV is turned on by a system event (like a Video Call or a Reminder) and no one interacts with the TV, the system will automatically turn the TV back off after the set time has elapsed. Options are
- 5 minutes
- 15 minutes (default)
- 30 minutes
- 1 hour
- 2 hours
- 4 hours
- Don't power off TV