---
title: Dish: Setting Remote Address to 1
slug: dish-setting-remote-address-to-1
docTags: 
createdAt: 2026-07-22T21:24:15.042Z
---

# Overview

The older Dish cable/satellite set-top boxes that use the remotes pictured below must have their **Remote Address set to 1** for the JubileeTV Console to control them. 

::Image[]{src="https://api.archbee.com/api/optimize/nvYzB8CbLv7hNbU6YC8mR/upiNymjgAWXrhjpt_k33p_old-dish-remotes.png" size="40" isUploading="false" position="center" width="520" height="693" darkWidth="520" darkHeight="693" showCaption="false"}

**If you're stuck on the screen below** while configuring your Dish box, please follow the instructions below to **set Remote Address to 1**.

![](https://api.archbee.com/api/optimize/nvYzB8CbLv7hNbU6YC8mR/oKfiwCI3mcS5Q1HN2ecxi_dish-remote-address-issue.png)

# Instructions

:::hint{type="warning"}
You will need to use your Dish remote (one of the remotes pictured above) to change settings on your Dish Box. 
:::

1. Locate and press the **SYSTEM INFO **button on the front panel of your Dish receiver.
2. While the System Info screen is displayed on your TV, point the **Dish remote** at the Dish box and press the **SAT **button on the remote.
3. Press the number **1** on the Dish remote.
4. Press the **#** button on the Dish remote.
5. Press the **RECORD** button on the Dish remote.
6. Press